Process analyzers　-　pH meter ORP meter

• Easy-to-use pH analyzer for field installation in a compact and rigid aluminum case
• Easier procedure for calibration with a standard solution; auto determination of electrode deterioration
• Alterable output range
• Self-diagnostic function for failure （burn-out output）as. range:

Meas. range

pH: -1～14

• Easy-to-use ORP analyzer for field installation in a compact and rigid aluminum case
• Automated check with a standard solution; auto determination of electrode deterioration
• Alterable output range
• Self-diagnostic function for failure （burn-out output）

Meas. range

-2,000～+2,000mV

• Hart communication interface（version 7） using a 2 wire, 24 VDC circuit
• Measurement of both pH or ORP available
• Die cast aluminum case, digital display and a wide range of other useful features
• One touch auto calibration
• Self diagnosis

Meas. range

-1.00～15.00（pH）, -2,000～2,000mV（ORP）

• Multi-function pH/ORP analyzer for field installation in a compact die-cast aluminum case
• Single-operation automated calibration and various self-diagnostic functions
• 2 circuit transmission output for pH/ORP and sample temperature with freely settable output range
• Power source： AC90～264V, 50/60H

Meas. range

pH meter（HBM-160） : pH: -1～15
ORP meter（HBM-162）: -2,000～+2,000mV

• Transparent PVC holder（heat resistance: 60℃）or semi-transparent PP holder （heat resistance: 80℃）
• Length: 0.5～3.0 m
• KCl supply type holder retains KCl inside
• Mounting bracket, mounting flange, etc. are available

• Throw-in type for deep tanks or drop-in type with a protection pipe
• Transparent PVC detector（heat resistance: 60℃）
• SUS protection pipe（maximum length: 5 m）and mounting bracket are available

• HC-G80: transparent PVC holder （heat resistance: 60℃） （maximum pressure resistance: 0.3 MPa）
• HC-G82: PP/SUS316 holder（heat resistance: 80℃） or PVDF/SUS316 holder（heat resistance: 100℃） （maximum pressure resistance: 0.5 MPa）

• Immersion type pH/ORP electrode holder combined with pulse air jet cleaner
• Cleaning by high-speed water stream created by the rapid expansion of pulse-jetted compressed air in the sample water
• High cleaning effect due to air bubbles present in the water stream randomly hitting the electrode
• No consumables required, such as reagents, brushes